Nitrogen flow regulator for DI
Nitrogen improves the quality of any solder joint because it provides extra heat and helps prevent tip oxidation.
The MN-A regulates nitrogen flow to the soldering tip in order to optimize consumption.
It automatically activates the flow when you remove the T245-NA handpiece from the stand. The flow stops when the tool is placed back
and the tip temperature drops to the sleep mode.
It requires the GN-A generator or an available nitrogen supply at the operator´s bench.
The MN-A works with DI control unit and the discontinued DD or DM.
The MN-A regulates nitrogen flow to the soldering tip in order to optimize consumption.
It automatically activates the flow when you remove the T245-NA handpiece from the stand. The flow stops when the tool is placed back
and the tip temperature drops to the sleep mode.
It requires the GN-A generator or an available nitrogen supply at the operator´s bench.
The MN-A works with DI control unit and the discontinued DD or DM.
| Weight | 1.142 kg (2.51 lb) |
| Size | 50x120x130 mm |
| Voltage(AC) | 24V (from control unit) |
| Power | 3W |
| N2 flow regulation | 0.5 - 3.5 SLPM (5 Bar) |
| Max. pressure | 6 Bar |
| Ambient operating temp. | 10-40 ºC / 50-104 ºF |
| ESD Safe | |
| Package weight | 1.298 kg (2.86 lb) |
| Package dimensions | 243 x 115 x 75 mm |