Pneumatic Desoldering Module for DDE & DME
It is required available compressed air at the operator´s bench.
The Pneumatic Desoldering Module is indispensable for a complete desoldering process.
By using compressed air and a Venturi valve. the system provides the best results due to its instantaneous vacuum ramp.
It is supplied with easy-to-change filters for extending the pump´s life.
The MVE can be joined to any port of the DDE & DME control units and has the possibility
to be controlled by the P-005 Pedal.
It works with the comfortable DS360 or DR560 desoldering irons and their corresponding tips.
The Pneumatic Desoldering Module is indispensable for a complete desoldering process.
By using compressed air and a Venturi valve. the system provides the best results due to its instantaneous vacuum ramp.
It is supplied with easy-to-change filters for extending the pump´s life.
The MVE can be joined to any port of the DDE & DME control units and has the possibility
to be controlled by the P-005 Pedal.
It works with the comfortable DS360 or DR560 desoldering irons and their corresponding tips.
Weight | 700 gr (1.54 lb) |
Dimensions | 145 x 55 x 225mm |
Air pressure | 4 - 6 Bar |
Vacuum (at 6 Bar) | 90% / 680mmHg / 26.8inHg |
Flow rate | 15 SLPM |
Ambient operating temp. | 10-40 ºC / 50-104 ºF |
Pedal connection | |
ESD Safe | |
Package weight | 1.000 kg (2.20 lb) |
Package dimensions | 280 x 195 x 115 mm |