Nitrogen flow regulator for DDE & DME
Nitrogen improves the quality of any solder joint as it provides extra heat and helps prevent tip oxidation.
The MNE-A regulates nitrogen flow to the soldering tip in order to optimize consumption.
It automatically activates the flow when you remove the T245-NA handle from the stand. The flow stops when the tool is placed back
and the tip temperature drops to the sleep mode.
It requires the GN-A generator or an available nitrogen supply at the operator´s bench.
The MNE-A can be joined to any port of the DDE & DME control units and has the possibility
to be controlled by the P-005 Pedal.
The MNE-A regulates nitrogen flow to the soldering tip in order to optimize consumption.
It automatically activates the flow when you remove the T245-NA handle from the stand. The flow stops when the tool is placed back
and the tip temperature drops to the sleep mode.
It requires the GN-A generator or an available nitrogen supply at the operator´s bench.
The MNE-A can be joined to any port of the DDE & DME control units and has the possibility
to be controlled by the P-005 Pedal.
Weight | 1.142 kg (2.52 lb) |
Size | 55 x130 x140 mm |
Voltage(AC) | 24V (from control unit) |
Power | 3W |
N2 Pressure range supply | 3-5 Bar |
Max. pressure | 6 Bar |
N2 flow regulation | 0.5 - 3 SLPM |
Recommended N2 flow | 1-2 SLPM |
Ambient operating temp. | 10-40 ºC / 50-104 ºF |
ESD Safe | |
Package weight | 1.298 kg (2.86 lb) |
Package dimensions | 243 x 115 x 75 mm |