Nitrogen Kit for DI
This is the ideal solution for improving the quality of any solder joint by using nitrogen as it provides extra heat and helps prevent tip oxidation.
The nitrogen flow is automatically activated when you remove the T245-NA nitrogen handle from
the stand. It stops when the tool is placed back and the tip temperature drops to the sleep mode.
This kit requires the GN-A nitrogen generator or an available nitrogen supply at the operator´s bench.
The KN-A works with DI. DD or DM control units.
The nitrogen flow is automatically activated when you remove the T245-NA nitrogen handle from
the stand. It stops when the tool is placed back and the tip temperature drops to the sleep mode.
This kit requires the GN-A nitrogen generator or an available nitrogen supply at the operator´s bench.
The KN-A works with DI. DD or DM control units.
| Weight | 3.712 kg (8.18 lb) |
| Size | See individual modules |
| N2 pressure range supply | 3-5 bar |
| Max. pressure | 6 bar |
| N2 flow regulation | 0.5 - 3.5 SLPM (at 5 bar) |
| Recommended N2 flow | 1-2 SLPM |
| Package weight | 4.194 kg (9.24 lb) |
| Package dimensions | 280 x 280 x 143 mm |