Pneumatic Desoldering Module for DI

MV-A

Specific References

It is required available compressed air at the operator´s bench.

The pneumatic suction module is indispensable for a complete desoldering process.

By using compressed air and a Venturi valve. the system provides the best results due to its instantaneous vacuum ramp.

It is equipped with some suction filters easy to change in order to extend the pump´s life.

MV is compatibe with CV station and DI control
unit which manage the tip temperature while module removes the molten solder.

MV works with the comfortable DS360 or DR560 desoldering irons and their corresponding tips.
Weight679 gr (1.49 lb)
Size145x55x225mm
Air pressure4 - 6 Bar
Vacuum (at 6 Bar)90% / 680mmHg / 26.8inHg
Flow rate15 SLPM
Ambient operating temp.10-40 ºC / 50-104 ºF
ESD Safe
Package weight982 gr (2.16 lb)
Package dimensions285 x 195 x 115 mm