Nitrogen flow regulator for DDE & DME


Specific References

Nitrogen improves the quality of any solder joint as it provides extra heat and helps prevent tip oxidation.

The MNE-A regulates nitrogen flow to the soldering tip in order to optimize consumption.

It automatically activates the flow when you remove the T245-NA handle from the stand. The flow stops when the tool is placed back
and the tip temperature drops to the sleep mode.

It requires the GN-A generator or an available nitrogen supply at the operator´s bench.

The MNE-A can be joined to any port of the DDE & DME control units and has the possibility
to be controlled by the P-005 Pedal.
Weight1.142 kg (2.52 lb)
Size55 x130 x140 mm
Voltage(AC)24V (from control unit)
N2 Pressure range supply3-5 Bar
Max. pressure6 Bar
N2 flow regulation0.5 - 3 SLPM
Recommended N2 flow1-2 SLPM
Ambient operating temp.10-40 ºC / 50-104 ºF
ESD Safe
Package weight1.298 kg (2.86 lb)
Package dimensions243 x 115 x 75 mm