Teclado con RFID para Velbus

Teclado antivandálico con tarjetas RFID para el control de acceso utilizando el sistema de domótica de Velbus
Velleman
VMBKP

Specific References

  • apto para el uso con el sistema de domótica de Velbus
  • soporte antivandálico (aleación de zinc) para el montaje en superficie
  • panel frontal: acero inoxidable
  • teclado retroiluminado (azul) con teclas de metal y duración regulable (encendido - 10 seg. - apagado)
  • standby LED and 2 user channel status LEDs on the front
  • built-in tamper detection
  • weatherproof (IP65)
  • 2 separate user channels with max. 1,000 users for controlling channel 1 and max. 100 users for channel 2
  • 50 visitor codes for temporary workers and visitors, for one time use or which expire after a programmable time of 1-99 hours
  • 4-8 digit user codes, RFID cards or fobs, or combination of the two for different security levels
  • advanced possibilities using Velbus configuration:
  • channel inhibition during certain periods and/or activated by Velbus buttons, sensors,...
  • configure a Velbus button as egress button, for opening the door without using codes or cards (e.g. for a button inside the building)
  • additional functionality using inputs/outputs that are not connected to the Velbus system (if needed these can be connected using Velbus input and output modules):
  • input for sensing the door position: e.g. by directly connecting a normally closed magnetic door switch (used for warning beeps when the door remains open, advanced security access, )
  • egress input: for opening the door without using codes or cards, eg. using a button inside the building directly wired to the keypad
  • duress output: when entering the duress code, the user channels will be operated just like a normal code, but additionally the duress output (open collector) will be closed, eg. for triggering a silent alarm when someone is forced to operate the keypad
  • alarm output (open collector): closes when the door is forced open or opened after the egress delay (configurable 1-99 seconds)
  • compatible con: 125 kHz Manchester 64-bit EM4100 & EM4200 EM cards and keyfobs
  • CAN terminator switch with state detection
  • 8 Velbus channels: 2 user channels, tamper alarm, 5 virtual buttons
  • uses one Velbus address (configurable in VelbusLink)
  • extensive day, week and year programs plus a built-in astronomical clock (sunrise and sunset timing) are included to operate, lock and unlock the channels automatically (configurable in VelbusLink)
alimentación
15 ±3 VDC
peso
400 g
consumo de corriente
130 mA max.
carcasa
die-cast zinc alloy protection bracket
número de canales
8
dimensiones (Al x L x P)
144 x 78 x 32 mm
grado de protección
IP65
condiciones de funcionamiento
-20 to +70°C
condiciones de almacenaje
-20 to +70°C. 5-95% relative humidity non-condensing
Información
mounting screws. wall plugs and 2 RFID cards included
Velbus bus connector cross section (solid wire)
0.5 - 1.5 mm²
delays for code entry and card reading
10 seconds max. delay for next digit entry. 30 seconds max. delay for code entry after card reading
address range
1-250
number of program steps
70 max.
faceplate material
acero inoxidable
máx. potencia transmitida
< -57 dBm